Skip to content

Yours *TrulyJuly*

I do everything content.

Do your bit and recycle as much as you can. Here’s an idea what to do with juice bottles.

Advertisements
Juice bottles: Cut the head off, drill some holes in the base - for some practical flower pots.

Juice bottles: Cut the head off, drill some holes in the base – for some practical flower pots.

 

The shape of these juice bottles is actually ideal for flower pots:

– The diameter of the bottle is about 10cm, a standard size for flower pots.

– The base is raised into a punt and gives the ideal points to drill drainage holes: As they are raised, it ensures there will always be a bit of water in the very bottom.

– The top bit can be used as a greenhouse roof to protect seedlings from weather and mice.

 

How to make flower pots from soft drink bottles:

With a pair of nail scissors, cut the top bit off.

You’ll have to cut round, that’s why it’s easier with nail scissors. Follow a line on the bottle, it’s hard not to cut skew.

Depending on the length of roots the plants will grow you can keep the bottom bit quite tall or cut it down to a standard size.
Because the plastic is see-through, you can leave a wide rim above the ground level which keeps in all the mess.

Drill drain holes in the base of the bottle.

Hold the drill steady, it’s easy to slip on the plastic. Drill about 5 holes around the centre point of the base.

Depending on the water consumption of the plant you can drill large holes so the earth will drain well or small holes to capture water.
If the plant likes wet feet, you can drill the holes higher up.

Drill ventilation holes in the top bit of the bottle.

Hold the drill even steadier, this is a slanted surface. Drill about 5 evenly spread holes in the shoulder of the bottle.

You can use the remaining  bottle tops as mini greenhouse roofs. They fit very tight into the flower pot and won’t easily come off.
Depending on the humidity preferences of the plant, you can drill large holes for good ventilation or small holes for capturing moisture and heat.

 

Tags: , ,

%d bloggers like this: